100kVA-2500kVA 3 Phase Silent Electric Generac Diesel Power Generator with Yuchai Mitsubishi Sme FAW Sdec Yto Weichai Yangdong Chinese Engine for Sale

Basic Info

Model NO.	MC
After-sales Service	Responsible
Warranty	12 Months or 1200 Operation Hours
Type	Self-Starting Diesel Generator
Installation Method	Fixed
Stroke	Four Stroke
Cooling Method	Water Cooling
Output Type	AC Three Phase
Speed	Low Speed
Conditions of Use	Land Use
Usage	Common Units, Standby Unit, Emergency Crew
Landuse Type of Unit	Automation Type
Excitation Mode	Static Exciter
Engine Brand	Yuchai FAW Sdec Yto Weichai Yangdong
Alternator	Stamford / Leroy Somer /Mecc Alte
Control Panel	Smartgen,Deepsea,Optional
Soundless Generator Price	Three Phase Generator Price
Canopy Type	Silent Sound Proof/Weather Proof/Anti-Rusted Proof
Frequency(Hz)	50Hz/60Hz ,1500rpm 1800rpm
Voltage Output	230/400V,22-480V
Application[a]	Telecom/Mining/Construction/Data Center
Application[B]	Commercial/Power Plant/Factory/Industrial
Accessory	Spare Parts Documents
Governing Type	Mech/Elec/ECU/Ecm/Adec/Hpcr
Electric Start Generator	Portable Power Generator Set
Certificate Available	CE, ISO, OEM Authorization etc.
AC Three Phase Diesel Generators	Power Generating Unit
Low Rpm Permanent Magnet Generator	Diesel Electrical Set
Transport Package	Both Standard Marine Packing or Compact Packing.
Specification	As below Spec. with details
Trademark	Mecca
Origin	China
HS Code	85021100
Production Capacity	1000/Year

Product Description

MECCA POWER MEI 2020 REWARDED Low Fuel Consumption DIESEL GENERATORAll key part produced by Chinese manufacturers,designed by Mecca,Fuel consumption down to 4.28L/h,with superior sound proof tech,61-63 dB in 7m.We're Mecca Power,but do more than power,always trying best to supply performance monster to you.

Alternator Data
♦ Operate either 50Hz or 60Hz.											♦Stator grease insulation covered
♦ Standard enclosure IP23, but IP44, IP55 for option											♦Rotator and excitation high polymer
♦ Insulation class H.											♦ Resist the corruption oil and acid
♦ Shunt excitataion systems.											♦Rotator balance is in accordance with BS5625
♦ AREP or PMG system for options.											standard 12.5
♦ Automatic voltage regulator											♦High-quality lubrication sealed long-time bearing
♦ Single bearing alternator											♦Rotator silicon steel close tight

Standard Accessories
*Auto Control Panel											*Starting Motor
*Main Ciruit Breaker											*Exhaust silencer
*Fuel tank											*Starting battery
*Base Frame											*Float battery charger
*Filter											*Flange

Mecca Power, as part of a Global Power Supplier initiative, provides a professional solution for the design, application and after-sales support of generators, with self-owned factory assets, independent R&D team, complete infrastructure equipment, provides a professional solution for the design, production and application support of intelligent generator sets with a broad and diverse range of gen-set power products that can operate independently, paralleled, on-site or remotely controlled. As a prestigious OEM, we maintain a sound relationship with our main material suppliers, such as Deutz, Man, Doosan, Stamford, Leroy Somer, Mecc Alte, Deepsea, ComAp, etc. Strongly focused on innovation and technical service, Mecca Power has been successfully used in hundreds of projects, widely applied in buildings, constructions, Telecom, data centers, mining, etc., covering over 90 countries in Asia, Africa, Oceania, Europe, Middle East and America. With over 10 years of experience in manufacturing and exporting energy products, the Mecca team will provide you full-service solutions. BELIVE THAT WE ARE WORTHY OF YOUR TRUST!

 

-----------------------------------------------------------------------------------------------MAINTENANCE---------------------------------------------------------------------------------------------
General Troubleshooting This section lists the generating set for some common fault, the reasons for the failure and determines the method of fault. General operators can determine their own fault and note, maintenance it according to the brochure. But please contact the repairing agents when meeting a special note or not listed failure of operation. Please remember the following suggestions before repairing: - Make sure that study the failure carefully before any operation. - Repair with the easiest way and most commonly used method. - Find the exact causes of failure and completely solve the fault. 1. Generator Sets Description of this section is for reference only. If the following failure occurs please contact the repairing agents. (Some models of control panel installed only parts of the following warning indicator light)

Icon	Indicator Light	Reason	Fault Analysis
Low oil pressurealarm	Low oil pressurealarm	When oil pressure does notreduce normally, the light is on.	-General because of a lack of oil or lubricationsystem failure caused by (refueling or replacingthe oil filter)-When occurs this fault should automaticallyshutdown generator sets immediately.
High watertemperaturealarm	High watertemperaturealarm	When the water temperaturehas risen to a level higher thanor equal to the sensor setting,the light is on.	-General because of a lack of water or oilshortage, or overload.-When occurs this fault should automaticallyshutdown generator sets immediately.
Low fuel levelalarm	Low fuel levelalarm	When a fuel level has beendetected by the sensor fitted tothe daily tank, the light is on.	-General because of a lack of water or oilshortage, or overload.-When occurs this fault should automaticallyshutdown generator sets immediately.
Battery chargerfault alarm	Battery chargerfault alarm	If the charging system has fault,when engine running, the light isoff.	-Battery charging system fault caused.-The light is on at the initial start, when thecharger reaches a certain speed, the light is off.-This failure will not lead to automatic shutdowngenerating units.
Crank failurealarm	Crank failurealarm	When the generator set failedthree times (or six times) in arow starting, the light is on.	-Oil supply system or re-start the system failurecaused.
Overload orbreaker trippingalarm	Overload orbreaker trippingalarm	When overloading or Shortcircuit, the light is on. Trippingcircuit breakers cause generatorset load out.	-In this fault, it need to load or unload some partsto eliminate short-circuit, and then re-close thecircuit breaker.

Introduction of Maintenance grade(Interval) for the generator set A Level Maintenance Interval (Daily Maintenance)1. Check Daily Report of Genset .2. Check fuel level and coolant level. 3. Check alternator for cracks or other damage, and the condition of the belts must be checked, flab or other damage.4. Check the Air filter. The air filter should be replaced when necessary .5. Release fuel tank and fuel filter's water and sediment.6. Check the water cooling filter.7. Check starting battery and electrolyte, add electrolyte when necessary. 8. Check the starter, check noisy defect.9. Use air syringe cleaner to clean the water tank, coolant system and cooled fin net.B Level Maintenance Interval (Less than 400 hours)1. Repeatedly check A Level Daily Maintenance steps.2. After operating 100 to 250 hours, replace the fuel filter. All the fuel filters should not be cleaned, it should be replaced. 100 to 250 hours is just flexible time, actually it must be according to the practice and real fact. 3. After operating 200 to 250 hours, replace the oil & oil filter. All the lube oil must fit up to the CF Grade of American Petroleum Institute.4. After operating 300 to 400 hours, replace the air filter. The air filter can be cleaned with air syringe, or it can be replaced. The replacement must be according to the environment and real fact.5. Replace the cooling system and add coolant concentration.6. Clean the crankshaft and inlet, outlet air- filter net. C Level Maintenance Interval (2000-3000 hours), Please do as follows:1. Repeatedly check A and B Level Daily Maintenance steps.2. Remove the tap of valve, clean and wash oil dirt and sludge.3. Fasten snails from each part (including running parts and fixed parts)4. Clean and wash the crankcase, oil sludge, steel scraps and sediment with engine.5. Check wearing of the engine turbo, clean and wash accumulation of carbon, adjust it when necessary.6. Check and adjust valve clearance.7. Check PT pump, quality of injection, adjust injection process, adjust it when necessary.8. Check and adjust the tension of fan belt and water pump belt, adjust and replace it when necessary; clean and wash water tank radiator fins, then check the using capability of thermostat.Current Repair (D Level Maintenance)(3000-4000 hours)1. Check valve, valve seat and other wearing, repair or change it when necessary.2. Check P pump, quality of injection, repair and adjust it when necessary.3. Check and adjust connecting rod and fastening twisting torque.4. Check and adjust valve clearance.5. Check the trip of injector.6. Check and adjust tension of fan and generating belt.7. Clean and wash accumulation of carbon in inlet pipes.8. Clean and wash the core of air cooler.9. Clean and wash the whole oil lubrication system.10. Clean and wash room of rocker arm, oil sludge in the sump and Metal scrap-iron.Medium Repair (6000-8000 hours)1. Including the items of minor repair.2. Disassemble generator(except crankshaft)3. Check the easy worn spare parts in pitman shaft system, gas distribution system, lubrication system, cooling system of cylinder, Piston, Intake and exhaust valve, replace them when necessary.4. Check fuel supplying system, adjust oil pump and injector.5. Repair and test the alternator, clean oil-sediment and lubricate the bearing of alternator.Overhaul (9000-15000hours)1. Including the items of intermediate repair.2. Disassemble all the parts in the generator.3. Replace cylinder, piston, piston loop, big and small bearing bushes, trusting pad of crankshaft, intake and exhaust valve, a whole set of tools for generator repair 4. Adjust oil pump, injector and replace pump core, injector5. Replace a whole set of repair tools for turbo charger and a repair set for water pump.6. Adjust the parts of connecting rod, crankshaft and generator body,repair or replace them when necessary